Practice Test: Question Set - 02
1. What is the use of thread ring gauge?
- (A) Check the
internal thread
- (B) Check the
external thread
- (C) Check the
thread length
- (D) Check the
internal diameter
2. What is the accuracy of depth micrometer?
- (A) 0.5 mm
- (B) 0.001 mm
- (C) 0.01 mm
- (D) 0.05 mm
3. How to identify and indicate the geometrical tolerance?
- (A) Numbers
- (B) Alphabets
- (C) Decimals
- (D) Symbols
4. What is used to measure different holes accurately with bore dial gauge?
- (A) Graduations
on the dial
- (B) Inter
changeable measuring rods
- (C) Sliding
plunger
- (D) Centering
shoes
5. What is the shape of angle gauge?
- (A) Square
- (B) Wedge
- (C) Rectangle
- (D) Cylinder
6. What is the unit of module in spur gear?
- (A) Microns
- (B) Centimeter
- (C) Millimeter
- (D) Meter
7. What is the height of tooth in spur gear?
- (A) Addendum
- (B) Dedendum
- (C) 2 ×
Addendum
- (D) Addendum +
Dedendum
8. How can you check the width of keyways?
- (A) Depth
micrometer
- (B) Vernier
caliper inner jaw
- (C) Outside
micrometer
- (D) Bore
dial gauge
9. Which work holding device is used for profile milling of cam?
- (A) Swivel
base vice
- (B) Circular
table attachment
- (C) Bolt and
Nuts
- (D) Fitting vice
10. Which mechanism used to rotate the circular table?
- (A) Rack and
Pinion mechanism
- (B) Bevel
gear mechanism
- (C) Pawl
and Ratchet mechanism
- (D) Worm
and Worm wheel mechanism
11. What is the range of sizes in feeler gauges as per IS: 3179?
- (A) 0.001 to
0.05 mm
- (B) 0.01 to 0.3
mm
- (C) 0.03 to 1.00
mm
- (D) 0.02 to 0.75
mm
12. How much tolerance is maintained to make gauges comparing job tolerance?
- (A) One - Tenth
- (B) One - Fifth
- (C) One -
Hundredth
- (D) One - Eight
13. How many sets available in telescopic gauge?
- (A) 8
- (B) 10
- (C) 6
- (D) 5
14. What is the uses of screw thread micrometer?
- (A) Measure
major diameter
- (B) Measure
pitch diameter
- (C) Measure
minor diameter
- (D) Measure
thickness of threads
Next Tests: