Practice Test: Question Set - 03
1. To draw sectional view, where cutting plane line is perpendicularly bent to parts through all important interior details is known as
- (A) Full section
- (B) Half section
- (C) Offset
section
- (D) Broken out
section
2. When a view that makes theatrical cut removing one quarter of an object is known as?
- (A) Full section
- (B) Half section
- (C) Offset
section
- (D) Partial
section
3. When the projectors are parallel to each other and also perpendicular to the plane of projection, the projection is called
- (A) Perspective
projection
- (B) Oblique
projection
- (C) Isometric
projection
- (D) Orthographic
projection
4. What type of section plane is used for pipe lines with frequent bends offsets at different position?
- (A) Offset
section plane
- (B) Removed
plane
- (C) Contiguous
plane
- (D) Full section
plane
5. The isometric view of equilateral triangle will be shown as
- (A) Equilateral
triangle
- (B) Scalene
triangle
- (C) Isosceles
triangle
- (D) Right angled
triangle
6. When the projection of a plane surface is identical to that surface projected, the projection is said to be of
- (A) True shape
- (B) Not true
shape
- (C) Reduced
shape of surface
- (D) Straight
line
7. In a sectional view usually shows _______ details?
- (A) Exterior
- (B) Interior
- (C) Profile
- (D) Fore
shortened
8. When a rectangular surface is perpendicular to the plane of projection, the resulting projection will be a
- (A) Straight
line
- (B) Surface
- (C) Curved line
- (D) Twisted line
9. What do the arrow beads on the cutting plane line indicators?
- (A) Which part
you are removing
- (B) Direction of
sight for section of the part
- (C) What are
parts look like
- (D) To show
where the material is cut
10. What type of line is to represent section plane?
- (A) Continuous
line
- (B) Center line
- (C) Dotted line
- (D) Chain thin,
thick at ends and changing direction
11. A circle will appear on an isometric drawing as an
- (A) Cycloid
- (B) Ellipse
- (C) Circle
- (D) Parabola
Next Tests: