Practice Test: Question Set - 05
1. Which part of the pedestal drilling machine controls the feeding of the drill while drilling?
- (A) Feed handle
- (B) Base
- (C) Work table
- (D) Motor
2. What is the reason for avoiding the side of grinding wheel?
- (A) Grinding
wheel guard damage
- (B) Spindle will
damage
- (C) Tool tip
break
- (D) Grinding
wheel break
3. What is the name of chisel used for taper turning?
- (A) Skew chisel
- (B) Gouge chisel
- (C) Round nose
chisel
- (D) Spear point
chisel
4. Why wax is applied to the point of dead centre in wood turning lathe?
- (A) Avoid noise
- (B) Prevent fire
- (C) Prevent
crack
- (D) Job rotating
smoothly
5. Which wood surface is avoided in sanding work?
- (A) Excess glue
and nailed surface
- (B) Convex surface
- (C) Straight
surface
- (D) Irregular
surface
6. Which determines the size of circular saw machine?
- (A) Small
diameter the circular blade
- (B) Medium
diameter the circular blade
- (C) Minimum
diameter the circular blade
- (D) Maximum diameter
the circular blade
7. Which P.P.E is used for handling the job while working in band saw machine?
- (A) Gloves
- (B) Hand screen
- (C) Welding
helmet
- (D) Leg guards
8. What is the use of jointer planer?
- (A) Planning to
end
- (B) Planning to
curves
- (C) Planning to
surface
- (D) Planning to
thickness
9. What are the safety precautions to be observed in thickness planer?
- (A) Never
lubricate the machine
- (B) Never bend
down to look while running
- (C) Blade free
of gum and edge
- (D) Apply proper
tension to blade
10. Which determines the size of wood turning lathe?
- (A) Width of the
work piece
- (B) Length of
the work piece
- (C) Thickness of
the work piece
- (D) Diameter of
the swing in work piece
11. What is the purpose of aluminium oxide abrasive in high speed sander machine?
- (A) Old wood
finishing
- (B) Soft wood
finishing
- (C) Hard wood
finishing
- (D) Nailed
surface finishing
12. Which is the fitted to wheels for smooth running in band saw machine?
- (A) Ball bearing
- (B) Split
bearing
- (C) Solid
bearing
- (D) Bush bearing
Next Tests: