Wood Engineering Multiple Choice Questions with Answers - Set 01 - ObjectiveBooks

Wood Engineering Multiple Choice Questions with Answers - Set 01

Practice Test: Question Set - 01

1. Which of the following is not a step in problem solving?
    (A) State the problem clearly
    (B) Select the best solution
    (C) Collect information
    (D) Rank the solutions according to effectiveness

2. A fire safety plan should include
    (A) A map of the building
    (B) At least four escape routes
    (C) Escape routes that can be opened during an emergency
    (D) None of the above

3. The three keys to good design include
    (A) Proportion, balance, symmetry
    (B) Appearance, sound construction, function
    (C) Function, harmony, emphasis
    (D) Sound construction, scale, evaluation

4. Which of the following is used to cut irregular shapes?
    (A) Backsaw
    (B) Dovetail saw
    (C) Ripsaw
    (D) Compass saw

5. The size of a power drill is determined by the size of its
    (A) Bit
    (B) Chuck
    (C) Torque
    (D) Collar

6. Which of the following is not recommended for chiseling?
    (A) Secure the workpiece with clamps
    (B) Keep the chisel close to your body
    (C) Always hit the tool squarely on top of the handle
    (D) Never allow the edge to touch other tools

7. Biscuits are made from compressed
    (A) Maple
    (B) Oak
    (C) Beech
    (D) Plywood

8. Rabbet joints are commonly used in the construction of cases, cabinet frames, and
    (A) Tabletops
    (B) Drawers
    (C) Roofing members
    (D) Picture frames

9. In a dado joint, a(n) _________ across one board receives the end of another boar(D)
    (A) L-shaped cut
    (B) Dado
    (C) Groove
    (D) Lap

10. Which of the following is not a hardwood?
    (A) Fir
    (B) Maple
    (C) Walnut
    (D) Cherry

11. Employers appreciate workers who
    (A) Have a positive attitude
    (B) Can accept criticism
    (C) Cooperate
    (D) All of the above

12. A hammer of which weight is best for everyday use?
    (A) 16 ounces
    (B) 5 ounces
    (C) 18 ounces
    (D) 20 ounces

13. Before planing, inspect the surface for
    (A) Sawdust
    (B) Correct dimensions
    (C) Warp
    (D) Finishes

14. When making biscuit joints, the slots should be slightly longer than the biscuits to allow for
    (A) Easy removal
    (B) Padding
    (C) Adjustments and expansion
    (D) Compression

15. The depth of a rabbet is usually _______ the thickness of the stock.
    (A) One-half to two-thirds
    (B) One-fourth to one-half
    (C) Equal to
    (D) Twice

Show and hide multiple DIV using JavaScript View All Answers

 Next Tests: