Practice Test: Question Set - 03
1. What is the name of hammer?
- (A) Ball peen
hammer
- (B) Cross peen
hammer
- (C) Claw hammer
- (D) Straight
peen hammer
2. What is the use of table scraf joint?
- (A) Increasing
length
- (B) Increasing
width
- (C) Increasing
thickness
- (D) Increasing
volume
3. What is the size of opening for designation 8DS20 in door in mm?
- (A) 800 ×
2000
- (B) 800 ×
2005
- (C) 800 ×
2010
- (D) 800 ×
2015
4. What is the method marked as ‘X’ in application of polishing?
- (A) First coat
- (B) Second coat
- (C) Finishing
- (D) Filling the
grains
5. What is the use of lengthening joints?
- (A) Tool handle
- (B) Packing
cases
- (C) Railways
sleeper
- (D) Building
work
6. What is the name of seasoning?
- (A) Air
seasoning
- (B) Kiln
seasoning
- (C) Water
seasoning
- (D) Steam
seasoning
7. What is the gap to be maintained between grinding wheel and work rest in pedestal grinding machine?
- (A) 2 to 3 mm
- (B) 4 to 5 mm
- (C) 6 to 7 mm
- (D) 8 to 9 mm
8. What is the name of vice?
- (A) Saw vice
- (B) Bench vice
- (C) Hand vice
- (D) Quick
release vice
9. Which type of grain on wood is suitable for furniture?
- (A) Straight
grain
- (B) Cross grain
- (C) Interlock
grain
- (D) Waye grain
10. What is the application of sand paper?
- (A) Sharpening
of wood chisel
- (B) Removed the
rusting
- (C) Prevent them
rusting
- (D) Last
smoothing the surface
11. What is the name of part marked as “x” in a trammel?
- (A) Point
- (B) Holder
- (C) Wooden
batten
- (D) Knurled
screw
12. What is the name of part marked as ‘X’?
