Practice Test: Question Set - 09
1. Pick up the correct statement from the following:
- (A) Approximate
geometric centre of the landing area, is called air port reference point
- (B) The
boundaries of horizontal surface and conical surface are marked with reference
to air port reference point
- (C) The
location of the air port on a map is the position of air port reference point
- (D) All the
above
2. As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed
- (A) 15 kmph
- (B) 25 kmph
- (C) 35 kmph
- (D) 45 kmph
3. The threshold markings are
- (A) 4 m wide
- (B) 1 m clear
space between adjacent
- (C) Placed
symmetrically on either side of the runway centre line
- (D) All the
above
4. Assertion A: The width of a taxiway is smaller than the runway width.
Reason R: The speed of the aircraft on a
taxiway is greater than that on runway.
Select your answer based on coding system
given below
- (A) Both A and R is true and R is the correct
explanation of A
- (B) Both A and R is true but R is not the
correct explanation of A
- (C) A is true but R is false
- (D) A is false but R is true
5. An aircraft is flying in an atmosphere of 30°C with a speed of 1260 kmph. Its speed is known as
- (A) Subsonic
- (B) Sonic
- (C) Super-sonic
- (D) Mach
6. The bearing of the runway at threshold is 290°, the runway number is
- (A) N 70° W
- (B) 290°
- (C) 29°
- (D) W 20° N
7. Pick up the correct statement from the following:
- (A) The
speed of the aircraft relative to the ground, is called cruising speed
- (B) The
speed of the aircraft relative to wind, is called air speed
- (C) When
wind is blowing the direction of the flight, air speed is less than cruising
speed
- (D) All the
above
8. The centre to centre spacing of heliport lighting along the periphery of landing and takeoff area should be
- (A) 2.5 m
- (B) 5.0 m
- (C) 7.5 m
- (D) 10.0 m
9. Pick up the correct statement from the following:
- (A) Approach
zone survey is carried out to determine the elevations of the protruding
obstructions above horizontal, conical and transitional surfaces
- (B) The
wind data of an air
port is depicted in the form of a chart known as wind rose
- (C) The
landing and takeoff of the air craft is made against the wind direction
- (D) All the
above
10. Pick up the correct statement from the following:
- (A) The basic
length of a runway is increased at a rate of 7% per 300 m of elevation of
M.S.L.
- (B) The standard
temperature at the site is obtained by reducing the standard sea level
temperature of 15°C at the rate of 6.5°C per 1000 m rise in elevation
- (C) The
aerodrome reference temperature is the monthly mean of the mean daily
temperature for the hottest month of the year
- (D) All the
above
Next Tests: