Practice Test: Question Set - 19
1. The 9 cm × 9 cm side of a brick as seen in the wall face, is generally known as
- (A) Stretcher
- (B) Face
- (C) Front
- (D) Header
2. The range of spread from the wall base to outer edge of a brick work foundation does not exceed
- (A) 1/2
horizontal to 1 vertical
- (B) 2/3
horizontal to 1 vertical
- (C) 1 horizontal
to 1 vertical
- (D) 2
horizontals to 1 vertical
3. The foundation in which a cantilever beam is provided to join two footings, is known as
- (A) Strip
footing
- (B) Strap
footing
- (C) Combined
footing
- (D) Raft
footing
4. Auger boring
- (A) Is
the most primitive method for making a hole in the ground
- (B) Is
generally employed in cohesive and other self soils above water table
- (C) Is
most economical up-to a depth of 5 meters
- (D) All
the above
5. In horizontal D.P.C, thickness of cement concrete (1 : 2 : 4) is
- (A) 2 cm
- (B) 4 cm
- (C) 6 cm
- (D) 8 cm
6. The triangular portion between any two adjacent arches and the tangent to their crowns, is
- (A) Haunch
- (B) Spandril
- (C) Soffit
- (D) Rise
7. The compaction of concrete in the drilled pile hole is done by compressed air in the case of
- (A) Simplex pile
- (B) Franki pile
- (C) Pressure
pile
- (D) Vibro pile
8. Pile foundations are suitable for
- (A) Water logged
soils
- (B) Soft rocks
- (C) Compact
soils
- (D) Multi-storeyed
buildings
9. Pick up the correct statement from the following:
- (A) Inclined
borings are made for taking samples under existing structures
- (B) Inclined
borings are occasionally used instead of vertical holes
- (C) The spacing
of inclined borings is kept such that one bore hole is vertically above the
bottom of an adjacent bore hole
- (D) All the
above
10. The inclined support at the ends of treads and rises of a stair, is known as
- (A) Baluster
- (B) Header
- (C) String
- (D) Beam
11. The brick laid with its breadth parallel to the face of a wall, is known as
- (A) Header
- (B) Stretcher
- (C) Closer
- (D) None of
these
12. The voussoir placed at crown of an arch, is known as a
- (A) Key
- (B) Soffit
- (C) Springer
- (D) Haunch
13. In places where the soil is soft and has small resistance to the flow of concrete, which one of the following types of piles, is used
- (A) Vibro pile
- (B) Pressure
pile
- (C) Franki pile
- (D) Pedestal
pile
14. Crown is located at
- (A) Highest
point on the extrados of the arch
- (B) Highest
point on the intrados of the arch
- (C) Skew-back of
the arch
- (D) None of
these
15. The under surface of an arch, is called
- (A) Soffit
- (B) Intrados
- (C) Haunch
- (D) Back
Next Tests: