Practice Test: Question Set - 13
1. The process of working a flat for the finishing coat, is known
- (A) Dubbing out
- (B) Floating
- (C) Knitting
- (D) Blistering
2. The highest line of sloping roof, where two opposite slopes meet, is known as
- (A) Rafter
- (B) Ridge
- (C) Crown
- (D) Eave
3. The depth of the ground water table may be ascertained by
- (A) Looking
through the well in the vicinity
- (B) Standing
on the well in the vicinity
- (C) Measuring
the depth of water in the well
- (D) None
of the above
4. Which of the following metal sheets is most effective in preventing dampness?
- (A) Copper
sheets
- (B) Lead
sheets
- (C) Aluminium
sheets
- (D) All the
above
5. Under reamed piles are generally used for
- (A) Machine
foundations
- (B) Factory
building
- (C) Tall
structures
- (D) All
the above
6. Pick up the incorrect statement from the following:
- (A) The
width of the wall is constructed thicker at the base in a stepped fashion
- (B) A
long vertical load transferring concrete structure is called a concrete pile
- (C) In
pile which transfers the load to the soil by the friction between the pile and
the surrounding soil is called friction pile
- (D) The pile
which transfers the load to a hard rock bed at certain depth is called load
bearing
7. Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is,
- (A) Q = Wh/6
(S + 2.5)
- (B) Q = Wh/2.5
(S + 6)
- (C) Q = (W
× 6)/h (S + 2.5)
- (D) Q = (W
× 2.5)/6 (S + h)
8. The rock formed from the solidification of molten matter (magma) is called:
- (A) Sedimentary
rock
- (B) Metamorphic
rock
- (C) Igneous rock
- (D) None of the
above
9. The maximum permissible deflection of a timber beam supporting a roof, is
- (A) L/100
- (B) L/150
- (C) L/260
- (D) L/360
10. Negative skin friction
- (A) Is a
downward drag acting on a pile due to downward movement of the surrounding
compressible soil relative to the pile
- (B) Develops due
to lowering of ground water
- (C) Both (a) and
(b)
- (D) Neither (a)
not (b)
11. The ceiling height of a building is
- (A) Between
ceiling and ground level
- (B) Between
ceiling and floor level
- (C) Upto roof
above ground level
- (D) Upto
ceiling from the ground level
12. The skirting/dado in a bath roof should be upto
- (A) Ceiling
- (B) 15
cm above floor level
- (C) 200 cm
- (D) Level of the
tap
13. The bearing capacity of piles is determined by
- (A) Dynamic
formula
- (B) Static
formula
- (C) Pile
load tests
- (D) All the
above
14. The vertical sides of a door and window openings provided in a wall, are known as
- (A) Verticals
- (B) Reveals
- (C) Jambs
- (D) None
of these
15. The type of ashlar masonry in which stones are finely chisel dressed and thickness of joints does not exceed 3 mm, is
- (A) Chamfered
ashlar masonry
- (B) Ashlar
facing masonry
- (C) Random
coursed ashlar masonry
- (D) Coursed
ashlar masonry
Next Tests: