Practice Test: Question Set - 06
1. In this type of concrete, the steel is pre-tensioned before the superimposed load is applied:
- (A) Aggregate
- (B) Pre-stressed
- (C) Reinforced
- (D) Preloaded
2. A partial auxiliary view is used to show only the __________ in the auxiliary view.
- (A) Projected
inclined plane
- (B) The
projected top view
- (C) The
projected side view
- (D) None
of the above
3. These are vertical distances above a common datum, reference plane, or point:
- (A) Plats
- (B) Elevations
- (C) Traverse
- (D) Profiles
4. An oil refinery relies on which type of drafter to maintain and update the technical piping drawings used for the construction and maintenance of the facility.
- (A) Architectural
- (B) Civil
- (C) Process
piping
- (D) Electrical
5. These are joined together in the field to build a structure:
- (A) Riveted
members
- (B) Main
members
- (C) Steel
fabrications
- (D) Assembled
fabrications
6. This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:
- (A) Primary
- (B) Secondary
- (C) Revolved
- (D) Successive
7. These are accurately drawn maps of cities and towns showing property lines and other features that control property ownership:
- (A) Monument
maps
- (B) Cadastral
maps
- (C) City
maps
- (D) Topographic
maps
8. Students can complete an associate's degree in drafting which normally takes about __________ years to complete.
- (A) One
- (B) Two
- (C) Three
- (D) Four
9. This type of weld is the most common in structural steel fabrication:
- (A) Fillet
weld
- (B) Beam
weld
- (C) Rivet weld
- (D) Structural
weld
10. In this type of view, the cutting plane line indicates both the location of the cutting plane and the direction of sight:
- (A) Removed
section
- (B) Revolved
section
- (C) Auxiliary
section
- (D) Partial
section
11. This type of solid has two bases that are parallel equal polygons:
- (A) Pyramid
- (B) Prism
- (C) Cone
- (D) Torus
12. Switches and relays should be shown in this position with no operating force or applied energy:
- (A) Normal
- (B) Closed
- (C) Offset
- (D) Application
13. Architectural drafters generally prefer to use ________ drawings to help illustrate 3-dimensional views of a structure.
- (A) Isometric
- (B) Perspective
- (C) Orthographic
- (D) Auxiliary
14. One way to evenly space dimensions on a drawing is to use the __________.
- (A) Dimension
Space tool
- (B) Linear tool
- (C) Continue
tool
- (D) Baseline
tool
15. The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.
- (A) Width
- (B) Height
- (C) Length
- (D) None
of the above
Next Tests: