Practice Test: Question Set - 02
1. Traditional drafters need to be able to create several different line widths because ________.
- (A) Different
line widths convey different information
- (B) The
line width has to do with how dark it appear in the finished drawing
- (C) They
seem to transmit better in a fax machine
- (D) It
makes no difference
2. Once the architect has finalized the house plans with the client any changes to the design requested by the client will require a ________.
- (A) Change order
- (B) Modification
slip
- (C) Whole
new set of drawings
- (D) None
of the above
3. There are two main types of projection:
- (A) Parallel
and Orthographic
- (B) Station-point
and Perspective
- (C) Parallel
and Convergent
- (D) Perspective
and Parallel
4. The bounding box method for setting up an isometric drawing helps the drafter ________.
- (A) Confine
the isometric drawing to its maximum size
- (B) Figure
what lines are to be illustrated vertical and horizontal
- (C) Position
the isometric drawing in paper space
- (D) None
of the above
5. In order to create one solid model from two or more separate solid shapes the drafter will need to position them and then ________.
- (A) Use
Union to join them
- (B) Use
the Join command
- (C) Use
the Add Parts tool
- (D) None
of the above
6. When creating an isometric drawing in Auto-CAD the drafter can utilize the Dynamic Input and Polar Coordinate system to place both vertical and horizontal lines. A line created from one point 3 inches at 180 degrees would be a ________ line.
- (A) Horizontal
- (B) Vertical
- (C) Inclined
- (D) None
of the above
7. This is a flat or rounded tab protruding from a surface, usually to provide a method for attachment:
- (A) Lug
- (B) Boss
- (C) Chamfer
- (D) Spot face
8. Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
- (A) Type
@3<45 and enter
- (B) Type
3 back slash and enter
- (C) Type
3 forward slash and enter
- (D) Type 3 and
try to use the Dynamic Input readout to find the end point
9. In working drawings, these show all necessary information not given directly on the drawing with its dimensions and notes:
- (A) Document
strips
- (B) Portable
documents
- (C) Formatting
forms
- (D) Title
and record strips
10. Once a drawing is determined to be complete, the title block is used to document the change from:
- (A) A
draft to a finished drawing
- (B) A
finished to a working drawing
- (C) An
assembly to a finished drawing
- (D) A
working drawing to a draft
11. A fillet is a rounded surface on the ________ corner of a part.
- (A) Inside
- (B) Outside
- (C) Radial
- (D) Isoplane
12. This is a conical-shaped recess around a hole, often used to receive a tapered screw head:
- (A) Boss
- (B) Spot-face
- (C) Counter-bore
- (D) Countersink
13. In order to set drawing limits for a 'C' size architectural drawing the drafter should set the limits to ________.
- (A) 0, 0 and 2, 9
- (B) 0, 0 and 17,
11
- (C) 0, 0 and 18,
24
- (D) 0, 0 and 34,
24
14. The most common geometric form used in gears today is this:
- (A) Involute
profile
- (B) Convolute
profile
- (C) Base circle
- (D) Spur
circle
15. Using this as a communication and design review tool can help shorten the process and eliminate productivity barriers:
- (A) Development
plans
- (B) Portable
document files
- (C) The
Internet and e-mail
- (D) Gantt
charts
Next Tests: