Practice Test: Question Set - 14
1. The site plan illustrates _________.
- (A) The
floor plan
- (B) Where
the house sits on the property
- (C) The
roof plan
- (D) Where
the garage and driveway are located
2. When creating your own blocks it is important to avoid drawing any portion of the block in the ________ layer.
- (A) Zero
- (B) Center line
- (C) Hatch
- (D) Hidden
line
3. In this type of section, one quarter of the object is removed:
- (A) Revolved
section
- (B) Removed
section
- (C) Quarter
section
- (D) Half
section
4. When dimensioning architectural drawings architects will utilize both ________ and ________ options.
- (A) Baseline
and continuous
- (B) Baseline
and linear
- (C) Quick
dim and linear
- (D) Linear
and continuous
5. When using versions of Auto-CAD prior to Release 2006 it may be necessary to ________ a block in order to edit it.
- (A) Copy
- (B) Explode
- (C) Offset
- (D) None
of the above
6. The architectural drafter usually begins a set of working drawings by creating the ________ plan first.
- (A) Foundation
- (B) Floor plan
- (C) Elevations
- (D) Building
section
7. The UCS icon represents the intersection of the __________.
- (A) X-axis
- (B) Y-axis
- (C) Z-axis
- (D) All
of the above
8. This type of section is limited by a break line:
- (A) Removed
section
- (B) Revolved
section
- (C) Broken-out
section
- (D) Half
section
9. Architectural dimensioning standards allow for the placement of dimensions inside the floor plan. These inside dimensions locate interior __________.
- (A) Door
openings and walls
- (B) Centers
of cabinets
- (C) Windows
- (D) All of the
above
10. This type of thread is a thread on the inside of a member:
- (A) Basic
thread
- (B) External
thread
- (C) Internal
thread
- (D) Major
diameter thread
11. The building construction industry relies on sets of ________ drawings to construct homes and commercial buildings.
- (A) Mechanical
- (B) Isometric
- (C) Architectural
working
- (D) All
of the above
12. Understanding the Cartesian coordinate system will help the beginning drafter __________.
- (A) Control
the accuracy of the drawing
- (B) Produce
a visible grid system
- (C) Select
a different text style
- (D) Choose
various line types
13. When filling an area with a hatch pattern in Auto-CAD the drafter needs to be able to ________.
- (A) See
the entire bounding area to hatch
- (B) Set Ortho on
- (C) Turn
ISO grid off
- (D) Set
the layer to Defpoints
14. There should be a visible gap between the wall and the _________ line.
- (A) Dimension
- (B) Extension
- (C) Center
- (D) Leader
15. In an assembly section, these parts should have their section lines left out or shown solid black:
- (A) Bolts
- (B) All
fasteners
- (C) Thin parts
- (D) Rivets
Next Tests: